-40%
150Pcs Set Premium Easy Automatic Rivet Tool Set Dual-hand Manual Rivet Nut Tool
$ 30.27
- Description
- Size Guide
Description
Product DescriptionFeatures:
【High Quality】: Made of high quality 60HRC Alloy Steel and TPU,durable and pratical to use.
【
Ergonomic Design
】
: The non-slip handle is made to fit comfortably in your hand and the perfect size is convenient to use.Short arms provide easy function and limited space.
【
Easy to use
】
: The internal use of the retaining slider makes it easy to remove or replace screws, troubleshoot holes, and pull them out of the retaining nuts.
【
Wide application
】
: Suitable for assembly of automobile, elevator, switch, instrument, decoration, motor and light industrial products; fixing metal plates, trailers, furniture repairs, DIY projects,sheet metal production and etc.
Specifications:
Product name: Manual rivet nut gun
Material: 60HRC Alloy Steel + TPU
Model: BT-605
Length: Approx.330mm/13inch
Capacity:
M3 M4 M5 M6 M8 M10
Maximum working stroke: Approx.9mm
Maximum effective working stroke: Approx.7mm
Maximum multiple of arm of force: 30
Package included:
1*Rivet nut gun
1*Wrench
40pcs * M3 x 9 mm
40pcs * M4 x 11 mm
30pcs * M5 x 13 mm
20pcs * M6 x 15 mm
15pcs * M8 x 18 mm
5pcs * M10 x 21 mm
6pcs * Interchangeable Mandrel Model: M3, M4, M5, M6, M8, M10
(M8 Mandrel is already set on The Tool)
1*Instruction Manual
Working steps(As pictured):
1. Open the handle will fit riveting nut on the rivet pole.
2. Insert the riveter into hole ofter putting the nut in the stem.
3. After packed nut insert rivet hole and close the handle nut riveting in position.
4. After putting in palce the rivet nut riveting,turning the knob clockwise direction as shown in figure,namely the unloadrivet nut.
Replacing steps (As pictured):
1. Use a matched wrench to loose nut nose piece and dismantle it.
2. Push the sheath back and separate the sexangular of scew from sheath.
3. When pushing the sheath at end,rotate the scew of riveter outward and remove it.
3. When pushing the sheath at end,rotate the needed screw of riveter inward.Tighten the rivet nuts stem and release the sheath.
Note:
Please allow 1-2cm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
powered by