Ground/Earth/Utility/Eye/Mobile Home/Hurricane Anchor Driver Adapter Tool

Description

Anchor Aider Anchor Driver Adapter Tool
Also see our Anchor Driver Aider Tool here: https://www.ebay.com/itm/225588637642
https://www.youtube.com/watch?v=EFC3BWWDP5M&list=PLRWNoQOsXPv3bBrV3UXeMEuCKLoyhRLhy
Adapt many anchor types to be driven into ground/ice/wood by using a power tool.  Compatible with Orange Screw, Vortex, and Earth anchors sold by Lowe's and Tractor Supply as well as many ice anchors currently on the market.  Also works with various eye screws.
Mobile Home anchor adapters are available in 1/2" and 3/4" square drive as either centered or offset to accommodate different anchor head configurations.  Bolts not included with mobile home adapters.
For eye type select LD, HD, or XD model with the desired drive connection from drop down list:
7/16" Hex; 3/4" nut combination (LD)
1/2" Square Drive (HD50)
1/2" Square Drive w/ 7/16" through-hole hex drive adapter (HD50H)
SDS Max drive connection (HDSDSM)
3/4" Square Drive (HD75)
3/4" Square Drive (XD75 and XD75U)
1" Square Drive (XD100 and XD100U)
Mobile home adapter models*:
1/2" Square Drive mobile home anchor adapter centered model (MHA50C)
1/2" Square Drive mobile home anchor adapter offset model (MHA50O)
3/4" Square Drive mobile home anchor adapter centered model (MHA75C)
3/4" Square Drive mobile home anchor adapter offset model (MHA75O)
1" Square Drive mobile home anchor adapter centered model (MHA100C)
1" Square Drive mobile home anchor adapter offset model (MHA100O)
*Our standard adapter fits a 1-1/2" wide head with 1-1/2" bolt spacing.  There are anchors on the market using 2" wide heads and possibly other sizes.  We can modify the design to accommodate 2" wide heads with 1-1/4" bolt spacing and possibly other dimensions.  Please verify your anchor head dimensions and let us know if they are different than the standard build so we can fabricate and send you one with the proper fit. No additional charge for these variations in dimensions but shipping time may be delayed while fabrication takes place.
Or buy in sets:
Set of 1/2" Drive mobile home anchor adapters (MHA50S = one of MHA50C
AND
one of MHA50O)
Set of 3/4" Drive mobile home anchor adapters (MHA75S = one of MHA75C
AND
one of MHA75C)
Set of 1/2" Drive mobile home
AND
eye type anchor adapters (AA50S = one each of MHA50C, MHA50O, and HD50)
Set of 3/4" Drive mobile home
AND
eye type anchor adapters (AA75S = one each of MHA75C, MHA75O, and HD75)
Light Duty (LD) for tent/trampoline anchors with shaft size up to 1/2" in diameter and various eye screws with an eye inside diameter of 1/2" or larger and eye outside diameter up to 2-5/8".  Clamp nut requires 3/4" wrench or socket.
Not designed for impact use - select HD or XD models for impact drivers.
Heavy Duty (HD) models support variable speed impact type drivers and anchor shaft sizes up to 3/4" in diameter and eye screws with inside diameter of 3/4" or larger and eye outside diameter up to 3".  Clamp nut requires 1-1/8" wrench or socket.  HD50H includes 7/16" hex to 1/2" drive adapter with "through-hole" giving it the LD capability to use a standard drill chuck allowing one to pull on the anchor while it is being removed from the ground if your driver does not have a hole in the 1/2" square drive anvil.
Extreme Duty (XD) models support variable speed impact type drivers and anchor shaft sizes up to 1" in diameter and eye screws with inside diameter of 1" or larger and eye outside diameter up to 3-1/2".  Clamp nut requires 1-1/2" wrench or socket.  XD75U and XD100U have special inserts to accommodate utility-type anchors with wire rope heads.
Holds the anchor shaft securely to eliminate the "joint" created by other available adapters.
Allows driving anchors into tighter areas than installation with a bar by hand.
Example anchors/eye screws and drill/driver not included.
For square drive options, it is recommended to use a driver with either a "through-hole" (preferred) or "pin detent" anvil design to allow retention during anchor extraction which usually requires pulling the driver while it is reversing the anchor out.  Adapters with square drives are equipped with holes for this purpose.  Not all driver anvils are equipped with holes but it is recommended to acquire a driver with this feature if anchors are going to be removed from the ground in addition to installing them.  Alternatively, the HD50H comes with a hex-to-1/2" square drive adapter to use a standard drill chuck.
Due to continuous improvements in design and fabrication, item received may have slightly different dimensions and appearance than the one shown but will meet or exceed the functionality described.
Made in and ships from USA!