Stone Rubber Molds for Concrete, Window Sill, Water Table 18", Recycled Material

Description

Each mold creates three cast stone 18" water tables to be used as window sills, trim, and borders between different building materials, such as stucco and stone
Water tables are tapered, plus include a drip slot on the bottom to entice water away from building
No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds
Production quality molds can be used hundreds of times
Made in the USA from plastisol rubber, including recycled plastisol
Stone Master Molds 18" water table mold creates 3 water tables measuring 18" long by 2.75" deep by 2.25" thickness at the back, tapering to 2" at the front. These production quality molds will last for hundreds of pours. Save money and create your own custom water tables for window sills, borders between various building materials, such as stone and stucco or stone and brick, and trim around doors or windows. Our plastisol rubber molds never require release agent, which saves time, money, and clean up.
Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.