Tascam CD-200BT CD Player / Bluetooth Receiver

Description

Stream Music Wirelessly from Bluetooth® Devices
With a front-panel-mounted antenna for maximum wireless reliability, the CD-200BT supports audio file playback from a variety of Bluetooth® compatible devices. And virtually any audio file type is supported — if your Bluetooth® device can play the file back by iTunes, Windows Media Player, or other player apps, it can be streamed wirelessly to the CD-200BT. With no additional wires needed to stream music from compatible audio sources, the CD-200BT allows for fast and easy audio playback.
Note: The transmitting device must support Bluetooth® transmission.
Register Bluetooth® Devices in Advance for Faster Source Switching and Operation
Bluetooth® audio playback requires pairing a transmitter to your receiver. Normally, only one Bluetooth® device and be paired at a time, but the CD-200BT’s device selection function allows you to pair multiple transmitting devices. By pairing in advance, you can switch seamlessly between different Bluetooth® transmission devices for playback with minimal connectivity interruption (only one device can be used for playback at a time). You can check the connection status of your transmitting devices directly from the CD-200BT for faster troubleshooting and easier system management.
High Quality Wireless Audio Playback with aptX® Codec
The CD-200BT supports multiple Bluetooth® transmission codecs to ensure high-quality audio playback from any transmitting device. The CD-200BT supports the A2DP (Advanced Audio Distribution Profile) for high-quality music playback, and SBC (Sub Band Codec), a standard A2DP codec. In addition, it supports the aptX® codec, making high quality wireless audio playback possible. The aptX® codec also has an error recovery function, so your audio is much less likely to be interrupted compared to ordinary SBC transmission.
Spec description
s
Playback media
CD, CD-ROM, CD-R, CD-RW (12cm / 8cm)
Playback format
CD-DA
Stereo, 44.1kHz, 16-bit
WAV
Stereo, 8k / 11.025k / 12k / 16k / 24k / 32k / 44.1k / 48k Hz, 8/16-bit
MP2
Stereo, 32k / 44.1k / 48k Hz, 32k to 384k bps
MP3
MPEG1 Audio Layer III, 32k / 44.1k / 48k Hz, 32k to 320k bps, VBR
Pitch control
±14%
Analog audio input
AUX
Connector
1/8" (3.5mm) Stereo mini jack × 1
Input impedance
22kΩ
Nominal input level
–20dBV
Maximum input level
–4dBV
Analog audio output
UNBALANCED
Connector
RCA Pin jack × 1 pair
Output impedance
200Ω
Nominal output level
–10dBV (0.32Vms)
Maximum output level
+6dBV (2.0Vms)
Digital audio output
COAXIAL
Connector
RCA Pin jack × 1
Output impedance
75Ω
Format
IEC60958-3 (S/PDIF)
OPTICAL
Connector
TOS (JEITA RC-5720C) × 1
Format
IEC60958-3 (S/PDIF)
Headphone out
Connector
1/4" (6.3mm) Stereo phone jack × 1
Maximum output level
20mW + 20mW or more (THD+N 0.1% or less, into 32Ω loaded)
Power
AC120V, 60Hz
Power consumption
8W
Dimensions (W×H×D)
18.9" × 3.7" × 11.7" / 481 × 94.5 × 298 mm
Weight
9.92 lbs. / 4.5 kg
Operating temperature
41˚F to 95˚F / 5 ˚C to 35˚C
Inclination of installation
5˚ or less
Backup Memory Items
Elapse time / Title display setting (CD), Playback mode (CD), Program (when loaded), Current folder (when CD loaded), Current source, Repeat playback function setting (ON/OFF), Pitch control (ON/OFF, CD) Pitch control value (CD)
Standard accessories
Wireless remote controller (RC-CD200iL), AA battery × 2, Rack mounting screw, Warranty card, Owner's manual
Audio performance
Frequency response
20Hz to 20kHz, ±1dB (playback, JEITA)
Distortion
0.01% or less (during playback, JEITA)
S/N ratio
90dB or more (playback, JEITA)
Dynamic range
90dB or more (playback, JEITA)
Channel separation
90dB or more (playback, JEITA)
CD-200 series Comparison Chart
Model
CD-200
CD-200SB
CD-200BT
CD-200iL
Source
CD
CD, SD, USB flash
(SD/SDHC)
CD, Bluetooth
(SBC, AAC, aptX)
CD, iPod dock
(Lightning/30-pin)
Supported Formats
CD-DA
Stereo, 44.1kHz/16-bit
WAV
8k / 11.025k / 12k / 16k / 22.05k / 24k / 32k / 44.1k / 48k Hz, 16/24-bit
MP3
32k / 44.1k / 48k Hz, 32k to 320k bps, VBR
MP2
–
32k / 44.1k / 48k Hz, 32k to 384k bps
AAC
–
Yes*
(see below)
–
Analog audio input
–
1/8" (3.5mm) Stereo mini × 1
Analog audio output
Unbalanced
RCA × 1 pair
Balanced
–
XLR 3-32 × 1 pair
–
Digital audio output
Coaxial
RCA × 1
Optical
TOS × 1
Headphone out
1/4" (6.3mm) Stereo phone jack × 1
Pitch control
±12.5%
±14%
±14%
±14%
Dimensions (W×H×D)
18.9" × 3.7" × 11.7" / 481 × 94.5 × 298 mm
Rack mount size
2U
Weight
9.3 lbs. / 4.2 kg
10.4 lbs. / 4.7 kg
9.9 lbs. / 4.5 kg
11.5 lbs. / 5.2 kg
* 8k / 11.025k / 12k / 16k / 22.05k / 24k / 32k / 44.1k / 48k Hz, 8k to 320kbps
Features at a Glance
Up to eight Bluetooth® transmission devices can be paired at a time for quick and easy switching
The name of the transmission device currently being used for playback can be displayed
aptX®, AAC and SBC codecs are supported
SCMS-T is supported using Bluetooth® (A2DP), so audio with content protection can be received
Bluetooth® antenna in the front for stable Bluetooth® connections
High-quality CD drive designed for audio
10-second shockproof memory prevents skipping from vibrations and other causes
CD drive supports playback of CD-DA and WAV/MP3/MP2 files (data CD)
Supports CD text and ID3 tags, so text information, including artist, album and track names, can be shown
Four playback modes (continuous, shuffle, program and single)
Repeat playback function (all or single)
Folder repeat playback (data CD)
Switch between display of track elapsed time, track and disc remaining time (audio CD)
+-14% pitch control function (audio CD/data CD)
Intro Check function can be used to play the first 10 seconds of songs in order (audio CD/data CD)
RCA analog outputs and COAXIAL/OPTICAL digital outputs
Stereo mini-jack input on the front for portable audio devices
2U EIA rack-mount size
Wireless remote controller with 10-key included
Paring and device selection can be conducted with the included wireless remote control
Headphone output